Wireless Sensor Solutions
Call today: (03) 8456 1545
Find us on Facebook
Sensor portal login
Distributor login
Contact us at WEB ID Systems
The latest news from WEB ID Systems
 
 
 

Wireless Voltage / Current Sensors Australia

The WEB ID wireless voltage / current sensors are capable of reading the voltage or current of electrical devices. The WEB ID Wireless Voltage Meter measures the voltage between two electrical points. It can be connected to the power and ground of any voltage source and measure within stated accuracy up to 5 VDC. It can be connected to any kind of variable voltage device, such as a transducer or sensor that outputs voltage.

Please note:
Negative voltages, any kind of AC Voltages, or DC Voltage exceeding 3.6V WILL DAMAGE the electronics of the wireless sensor. WEB ID is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.

Wireless 500 VAC/VDC Measurement Sensor

The wireless 500 VAC/VDC Voltage Measurement Sensor is an analog measuring device that reports the measured voltage on user specified intervals. The wireless sensor has three operating modes, in which you can obtain the voltage measurement in VACrms (root mean squared), the peak voltage, or the DC voltage. The modes must be set at the time of purchase; otherwise the default mode measures VACrms.

Wireless Battery Health Sensors Australia

The Wireless Battery Health Sensor is a DC analog voltage meter designed to measure battery voltage at specified intervals and wirelessly send the voltage readings to WEB ID online sensor monitoring system.

By connecting the leads on the WEB ID Wireless Battery Health Sensor to the positive and ground terminals of a battery, users can measure battery voltage through the WEB ID Online Sensor Monitoring and Notification System. Notifications can be set up through the online system to alert the user when battery levels reach a certain point. The data is also stored in the online system and can be reviewed and exported as a data sheet or graph.

 

Part No

Description

WIS-X-W1-VM-001-L01

Voltage Meter - 1.2 VDC

 

The wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor.
CE and ETSI certified.

WIS-X-W1-VM-005-L01

Voltage Meter - 5 VDC

 

The wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor.
CE and ETSI certified.

WIS-X-W1-VM-010-L01

Voltage Meter - 10 VDC

 

The wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor.
CE and ETSI certified.

WIS-X-W1-VD-DC-050-L01

Voltage Detection - 50 VDC

 

The Wireless Voltage Detection Sensor - 50 VDC - detects the presence or absence of electricity.
CE and ETSI certified.

WIS-X-W1-VM-500-L01

Voltage Meter - 500 VAC/VDC

 

The wireless voltage meters are capable of measuring the voltage off another device, battery, or sensor.
CE and ETSI certified.

Wireless AC Voltage Detection Sensors WIS-X-W1-VD-AC-500-L01

Voltage Detection - 500 VAC

 

The Wireless Voltage Detection Sensor - 500 VAC - detects the presence or absence of electricity
CE and ETSI certified.

Wireless 0-20 mA Current Sensors WIS-X-W1-MA-001-L01

Wireless 0-1 mA Current Sensors

 

The Wireless 0-1 mA DC Current Meter is designed to work with the Flex-Core MCT5 current transducer that converts 5 Amps AC into a DC signal up to 1 mA.

 

Wireless 0-20 mA Current Sensors WIS-X-W1-MA-020-L01

Wireless 0-20 mA Current Sensors

 

0-20mA current meters are capable of measuring the current off another device or sensor, up to 20mA (DC).

Wireless Battery Health Sensors WIS-X-MA-W1-LD

Wireless Battery Health Sensors

 

Analog voltage meters for measuring battery
voltage at specified intervals.

 

Wireless Voltage / Current Sensor features:

  • 433 or 900 MHz Operating Frequency
  • Replaceable 3.0V Coin Cell Battery
  • 30 - 50 metre non-line-of-sight device range*
  • Scientific grade sensor.
  • CE and ETSI certified.
  • Small size is ideal for embedded applications.
  • User defined thresholds for alerts and notifications.

* Actual range may vary depending on environment.
NB: Battery life is determined by sensor reporting frequency and other variables.

Wireless Voltage / Current Sensors Australia

 

Wireless Voltage / Current Sensor Caution / Notice:

This wireless water sensor is designed for applications in an ordinary environment (humidity and atmospheric pressure). Do not use this sensor under the following conditions as these factors can deteriorate the product characteristics and cause failures and burn-out.

• Corrosive gas or deoxidizing gas - chlorine gas, hydrogen sulfide gas, ammonia gas, sulfuric acid gas, nitric oxides gas, etc.).
• Volatile or flammable gas.
• Dusty conditions.
• Under low or high pressure.
• Wet or excessively humid locations.
• Places with salt water, oils chemical liquids or organic solvents.
• Where there are excessively strong vibrations.
• Other places where similar hazardous conditions exist.
Use this wireless temperature sensor within the specified temperature range. Higher temperature may cause deterioration of the characteristics or the material quality of the wireless voltage / current sensor.