Wireless Sensor Solutions
Call today: (03) 8456 1545
Find us on Facebook
Sensor portal login
Distributor login
Contact us at WEB ID Systems
The latest news from WEB ID Systems
 
 
 

Ethernet Gateway


The WEB ID Ethernet gateway allows your Wireless Sensors to communicate with theWEB ID Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will buffer up to 16,000 sensor data messages in on-board memory in the event of an internet connection interruption. When internet communication is re-established the sensor data will download to the WEB ID online system.

Data Capturing Options

Data collected by the Ethernet Gateway from the sensors in the network can be accessed when these interfaces are turned on. Multiple interfaces can be active at the same time. All interfaces require that the Ethernet gateway be set to a Static IP address. (By default, the unit uses DHCP).

SNMP Poll and Trap Interface

Use SNMP software to pull in gateway and sensor data. WEB ID provides a .MIB file.

MODBUS TCP Interface

Use MODBUS TCP software to pull in gateway and sensor data. WEB ID provides a register map.

Real Time TCP Interface

Poll on the gateway’s assigned port to retrieve gateway and sensor data.

Product features:

  • 433 MHz or 900 MHz Operating Frequency
  • 139.85 x 101.75 x 34.95 mm
  • -10 to +70 °C
  • 16,000 sensor messages (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored)
  • CE and ETSI certified.
  • AC power supply
  • Existing Internet connection required
  • No PC required for operation
  • Real time TCP interface
  • SNMP poll and trap interface
  • MODBUS TCP interface

 

 

Part No

Description

WIS-ETH

Ethernet Gateway

 

Standalone unit, no PC needed. External interface support for Real Time TCP, MODBUS TCP & SNMP.
*Supports up to 99 Wireless Sensors.
* Number of sensors supported depends on frequency of sensor transmissions (sensor heartbeat).

WIS-PO-ETH

Power Over Ethernet Gateway

 

Can be powered via Ethernet cable connection - Standalone unit, no PC needed. External interface support for Real Time TCP, MODBUS TCP & SNMP.
*Supports up to 99 Wireless Sensors.
* Number of sensors supported depends on frequency of sensor transmissions (sensor heartbeat).